ET9500 Installation and Configuration Guide
•
Enter the Scan Rate and Read Timeout.
•
The Scan Rate is the interval at which the ET90000 device is scanned. Minimum value
is 2 seconds, maximum is 20 seconds; the default value is 10 seconds.
•
Read Timeout is the time before an error is reported when no response is received.
Minimum value is 1 second, maximum is 10 seconds; the default value is 5 seconds.
•
Press the Save button to add the Profile to the list of devices to be configured.
•
Repeat this process until all the devices have been added.
•
Completed additions will be listed under Devices. Once all devices are added select
the 'restart system' icon to load the new configuration into the ET9500. See Figure 17.
Figure 15: Web Configurator Showing Node ID
Figure 16: Web Configurator Showing Save Icon
— 16 —