Table of Contents
Advertisement
ET9500 Installation and Configuration Guide
5
WEB CONFIGURATOR
5.1 Start WEB Configurator Application
•
Type the IP address of the ET9500 into your web browser to open the WEB Configurator
Application.
•
Once entered, screen below will be displayed.
5.2 Adding Profiles for Devices Connected to ET9500
•
Each ET90000 connected to the ET9500 must have a device profile created. To add a
profile select the 'Device' Tab from the toolbar.
•
The Active Profiles section lists the currently active device profiles, including previous
device additions. This list will be empty for new installations or after clearing all.
•
To add an active profile to support a device, click the "+" button under Devices Tab.
Figure 10: Changing IP Adress
Figure 11: Changing IP Adress
— 14 —
Advertisement
Table of Contents
