Table of Contents
Advertisement
5
WEB CONFIGURATOR
Type in a name for the device being added in the Device Name field. Shown in Figure 12.
•
•
Once device name has been entered, click the down arrow to select the Profile of
device connected. Shown in Figure 13.
•
This will present a drop-down box underneath the Current Profile column that lists
all the available profiles.
o
Profiles for supported devices will be offered in the drop-down box only for the
Field protocol option selected with the S bank of DIP switches in Section 2.2.
•
Specify the IP Address of the ET90000 device and unique Field Protocol Node-ID for
BACnet, Modbus and Metasys N2.
•
The value of the device's unique Node-ID is from 1 to 255.
•
Do not re-use any ET9500 MAC adresses assigned with the "A" bank of DIP switches.
Figure 12: Naming a Device
Figure 13: Selecting Profile of Device
Figure 14: Specifying IP Address and Node-ID
— 15 —
Advertisement
Table of Contents
