Intermec EasyCoder 301 Accessory Installation Manual page 5

Cleaning
Information in this manual is subject to change without prior notice and does not represent a
commitment on the part of Intermec Printer AB.
© Copyright Intermec Printer AB 1999. All rights reserved. Published in Sweden.
EasyCoder is a trademark of Intermec Technologies Corp.
Intermec EasyCoder 301 Paper Cutter– Installation Instructions Ed. 1
Cleaning on a regular basis is required for trouble-free opera-
tion. Should the cutter inadvertently have been used to cut
through any adhesive, you should clean the cutter immediately.
Tilt down the cutter and use a cotton swab moistened with
isopropyl alcohol, or a similar solvent, to wipe clean cutting
parts.
Paper Cutter
4