Manual Memory - Clarion DXZ468RMP Owner's Manual

Digital Radio/DAB Operations
∗ If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.
Switching programmes
1. Press the [ SRC ] button to receive a DAB
station.
2. Press the [ , ] lever upward or downward
to switch programmes in the DAB station.
Note:
• The programme name may be the same depend-
ing on DAB programmes.
Programme scan
This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when you
want to search for a desired programme.
1. Press the [ SRC ] button to receive a DAB
station.
2. Perform the following operation depending on
the connected model.
Press the [ ] button. "SERVICE SCAN" lights
up and the unit starts scanning each pro-
gramme for 10 seconds sequentially.
Each time the main unit scans, the programme
name is shown in the display.
3. To stop programme scan when a desired
programme is tuned in.
Press the [ ] button.

Manual memory

The main unit has a manual memory function
for DAB programmes. Up to 18 programmes ( 6
programmes each ) can be preset in the preset
buttons.
[ M1 ] , [ M2 ] and [ M3 ]
1. Press the [ SRC ] button to select the DAB
mode.
2. Press and hold the [ BND ] button for 1 second
or longer to select any one shown above.
3. Press the [ ] lever upward or downward
,
to select a desired programme.
4. Press and hold one of the [ DIRECT ] buttons
( 1 to 6 ) for 2 seconds or longer to store the
programme.
Note:
• The interrupt programme ( PTY or INFO ) cannot be
written into a manual memory.
Recalling a preset programme
1. Press the [ SRC ] button to select the DAB
mode.
2. Press the [ BND ] button. Each time you press
the [ BND ] button, the display changes in the
following order:
[ M1 ] [ M2 ] [ M3 ]
3. Press one of the [ DIRECT ] buttons to recall a
preset programme.
Note:
• Press and hold the [ DIRECT ] button for 2 seconds
or longer to store the programme currently being
received. ( Manual memory )
INFO ( Announcement )
In the INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement pro-
gramme automatically.
• Setting the INFO standby mode
If you press and hold the [ TA ] button for 1 second
or longer, the main unit is set into the INFO
standby mode until the selected announcement
is broadcast. When the selected announcement
broadcast starts, the announcement item appears
in the display. If you press and hold the [ TA ]
button for 1 second or longer while the selected
announcement broadcast is being received, the
selected announcement broadcast reception is
cancelled and the main unit goes into the INFO
standby mode.
• Cancelling INFO standby mode
To cancel the INFO standby mode, press and hold
the [ TA ] button for 1 second or longer.
• Information select
This is a function for selecting INFORMATION ON
or OFF in the Information interrupt mode.
You can set ON up to 6 information items.
[ M1 ] ...
33
DXZ468RMP