Basic Operations; Adjusting The Volume; Adjusting The Balance; Adjusting The Fader - Clarion DXZ468RMP Owner's Manual

Basic Operations

Adjusting the volume

1. Press the front part of the [ ROTARY ] knob. The
knob will pop up.
2. Turning the [ ROTARY ] knob clockwise increas-
es the volume; turning it counter-clockwise
decreases the volume.
∗ The volume level is from 0 ( minimum ) to 33
( maximum ) .
Audio mode adjustments
1. Press the [ A-M ] button to select the adjustment
mode. The mode switches as follows each time
the [ A-M ] button is pressed:
BASS TREBLE
Previous mode
2. Turning the [ ROTARY ] knob to adjust the se-
lected audio mode.
BASS ( Bass )
Adjustment range : - 6 to + 7
TREBLE ( Treble ) :
Adjustment range : - 6 to + 6
BALANCE ( Balance ) :
Adjustment range : L13 to R13
FADER ( Fader )
Adjustment range : F12 to R12
∗ The display returns to the previous mode 7
seconds after the adjustment.

Adjusting the bass

1. Press the [ A-M ] button and select "BASS 0".
2. Turning the [ ROTARY ] knob clockwise em-
phasizes the bass; turning it counterclockwise
attenuates the bass.
∗ The factory default setting is "0".
( Adjustment range: - 6 to + 7 )

Adjusting the treble

1. Press the [ A-M ] button and select "TREBLE
0".
2. Turning the [ ROTARY ] knob clockwise em-
phasizes the treble; turning it counterclock-
wise attenuates the treble.
∗ The factory default setting is "0".
( Adjustment range: -6 to +6 )
14
DXZ468RMP
BALANCE FADER
:
:

Adjusting the balance

1. Press the [ A-M ] button and select "BALANCE
0".
2. Turning the [ ROTARY ] knob clockwise empha-
sizes the sound from the right speaker; turning
it counterclockwise emphasizes the sound from
the left speaker.
∗ The factory default setting is "0".
( Adjustment range: L13 to R13 )
3. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.

Adjusting the fader

1. Press the [ A-M ] button and select "FADER 0".
2. Turning the [ ROTARY ] knob clockwise empha-
sizes the sound from the front speakers; turning
it counterclockwise emphasizes the sound from
the rear speakers.
∗ The factory default setting is "0".
( Adjustment range: F12 to R12 )
3. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.
Setting the Z-Enhancer
This unit are provided with 3 types of sound tone
effects stored in memory. Select the one you
prefer.
∗ The factory default setting is "Z-ENHANCER OFF".
Each time you press the [ Z ] button, the tone effect
changes in the following order:
"BASS BOOST"
"OFF"
"EXCITE" "OFF" ...
• BASS BOOST : bass emphasized
• IMPACT : bass and treble emphasized
• EXCITE : bass and treble emphasized
mid de-emphasized
• OFF : no sound effect
"IMPACT"