Manual Tuning; Preset Scan; Recalling A Preset Station - Clarion DXZ468RMP Owner's Manual

Radio Mode Operations

Manual tuning

There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.
1. Press the [ BND ] button and select the desired
band ( FM or AM ) .
∗ If "MANU" is not lit in the display, press and hold
the [ BND ] button for 1 second or longer.
"MANU" is lit in the display and manual tuning
is now available.
2. Tune into a station.
• Quick tuning:
Press the [
,
and hold in position for 1 second or longer to begin
station tuning.
• Step tuning:
Press the [
,
to perform manual tuning.
∗ If no operation is performed for more than 7 sec-
onds, manual tuning is cancelled and the display
returns to the previous mode.
Preset memory function
Preset memory function can store up to 24
stations:
six stations for each of FM1, FM2, FM3 and AM.
Manual memory function
1. Press the [ BND ] button, to select a band you
want to store in the memory.
2. Press the [
,
station.
3. Press and hold one of the [ DIRECT ] button for
2 seconds or longer to store the current station
into preset memory.
16
DXZ468RMP
] lever upward or downward
] lever upward or downward
] lever to tune into a desired
Auto store
Auto store is a function for storing up to 6 stations
that are automatically tuned in sequentially.
If 6 receivable stations cannot be received, a
previously stored station remains unoverwritten
at the memory position.
1. Press the [ BND ] button and select the desired
band ( FM or AM ( MW/LW )) .
2. Press and hold the [ PS/AS ] button for 2
seconds or longer. The stations with good
reception are stored automatically to the preset
channels.
∗ If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.

Preset scan

Preset scan receives the stations stored in preset
memory in order. This function is useful when
searching for a desired station in memory.
1. Press the [ PS/AS ] button.
2. When a desired station is tuned in, press the
[ PS/AS ] button again to continue receiving that
station.
Note:
• Be careful not to press and hold the [ PS/AS ] button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing sta-
tions.

Recalling a preset station

A total of 24 preset positions ( 6-FM1, 6-FM2,
6-FM3, 6-AM ) exists to store individual radio
stations in memory. Pressing the corresponding
[ DIRECT ] button recalls the stored radio frequency
automatically.
1. Press the [ BND ] button and select the desired
band ( FM or AM ) .
2. Press the corresponding [ DIRECT ] button to
recall the stored station.
∗ Press and hold one of the [ DIRECT ] buttons for
2 seconds or longer to store that station into
preset memory.