Dvd/Vcd Operation - Jensen JWM452 Installation And Owner's Manual

Remote Control Direct Track Entry
To select a track directly, use the number pad on the remote control (9).
For single digit entries, press the corresponding number. For two digit entries,
press the 10+ button followed by the last digit (i.e., for track 16, press 10+ and
then 6).
GOTO Direct Track/Chapter Access
Use the GOTO function to access a track (chapter) directly.
1.Press the GOTO button (25) on the remote control. The On Screen Display
information will appear with the track number highlighted.
2.Use the number keys on the remote control to enter the 3-digit track number
directly (i.e. for track 10, enter "010")
3.Press the ENTER button (5) to confirm and begin playback.
CD Playback Information
The following information is displayed at the top of the screen during CD
playback:
TRK ##/## –"1/18" indicates the first of 18 tracks on the CD is currently playing.
"X" indicates repeat play is OFF, "1" indicates repeat track, and
"A" indicates repeat disc.
Press the button on the remote control (26) repeatedly to view the following
information for elapsed/remaining playing time:
00:02:18 –total elapsed playing time of current track;
C –00 :34 :37–remaining playing time of current track;
T 00:02:18 –total elapsed playing time for current disc;
T–00 :34 :37 –remaining playing time for current disc.

DVD/VCD OPERATION

Inserting a Disc
Insert a disc label-side up into the disc slot (11) and the disc will begin to play.
Ejecting a DVD
Press the EJECT button (13) to stop DVD play and eject the DVD.
Play/Pausing Playback
Press the II button (3) to suspend or resume disc play.
u
Stop Playback
■
Press the 1 button (27) to suspend disc play, and "PRE STOP" will appear in the
display. Press the II button (3) to resume disc play from the last position. Press the
u
■
1 button(27) again and "STOP" will appear on the display.
Track Select
Press the >>| or |<< button (5, 2) to advance to the next or previous track on the disc.
The selected track number will appear on the display.
Menu Select
While in menu mode, press the BAND DVD MENU button (1) to select a menu option.
Fast Forward/Reverse
Press and hold the >>| or |<< button (5, 2) or press the >> or << buttons on the
remote control (16) once for FAST FORWARD/REVERSE X 2. Press and Hold
additional times for FORWARD X 4, X 8, X 20 or PLAY. Press the
the control panel or remote control (17) to end fast forward or reverse and resume
normal playback.
Repeat Chapter/Title
Press the 4 button (33) on the control panel or the RPT button (20) on the remote
control multiple times during playback to select from the following repeat play options:
• VCD: RPT 1(track), RPT ALL(disc), RPT OFF
• DVD: RPT Chapter, RPT TITLE, RPT ALL, RPT OFF
Programmed Playback
1. Press the PROG button (7) on the remote control to access the programmed
playback screen.
13
JWM452
II button (3) on
u