Dvd/Vcd Operation - Jensen AWM968BK Installation And Operation Manual

AWM968

DVD/VCD OPERATION

Inserting a Disc
Insert a disc label-side up into the disc slot (10) and the disc will begin to play.
NOTE: Press the DVD/USB button (8) to alternate between the USB and DVD source.
Ejecting a DVD
Press the eject button (19) to stop DVD play and eject the DVD.
Pausing Playback
Press the 2/ button (28) to suspend or resume disc play.
Stopping Playback
Press the 5/ button (31) to stop disc play, and "STOP" will appear in the display.
Track Select
Press the TUNE/SEEK/TRACK >>| or |<< button (13, 14) to advance to the next or previous
track on the disc. The selected track number will appear on the display.
Enter/Select
While in menu mode, press the VOL/PUSH/ENTER button (24) to select a menu option.
Language Selection
While playing a DVD, press the 6/RPT button (32) to change the DVD audio language.
Fast Forward/Reverse
Press and hold the TUNE/SEEK/TRACK >>| or |<< button (13, 14)
buttons on the remote control (17) once for FORWARD X 2. Press and hold additional times for
FORWARD X 4, X 8, X 20 or PLAY. Press the play/pause 2/
or remote control (18) to end fast forward or reverse and resume normal playback.
Repeat Chapter/Title
Press the 6/RPT button (32) on the control panel or the RPT button (21) on the remote control
multiple times during playback to select from the following repeat play options:
• VCD: REP 1 (track), REP ALL (disc), REP OFF
• DVD: REP Chapter, REP Title, REP All, REP OFF
Playback Control (VCD Only)
Press the MENU button (6) on the remote control to turn Playback Control on/off when this
feature is available on your VCD.
Programmed Playback
1.
2.
3.
4.
To delete the list, highlight "CLEAR" and then press ENTER. Press PROG to exit the
programmed playback screen.
DVD Playback Features
The following remote control features, along with many others, are available during DVD
playback (see "Remote Control Operation" on page 15 for complete functionality):
•
•
or press the >> or <<
•
•
button on the control panel (28)
NOTE: Feature availability is dependent upon DVD embedded information.
Playback Information
During DVD and VCD playback, press the
playback information on the screen, including the media playing and current playback time.
Continue pressing the
DVD Playback Information
The following information is displayed at the top of the screen during DVD playback:
•
•
•
9
Press the PROG button (8) on the remote control to access the programmed playback
screen:
Use the , , or cursor buttons (16) on the remote control to access the fields on
the "PROG" screen.
Use the number buttons on the remote control to enter a track number in each field.
Press the >/|| button (18) on the remote control or highlight "PLAY" on screen and then
press the ENTER button (5) to begin playback in the numbered order indicated.
LANG: Press to choose an alternate audio language, if available.
SUBTITLE: Press to select an alternate subtitle language, if available.
....
ANGLE: Press to select an alternate viewing angle, if available.
ZOOM: Press to zoom the picture at ZOOM 2, ZOOM 3, ZOOM 4, ZOOM 1/2, ZOOM 1/3
or ZOOM 1/4, or select OFF to return to normal view.
button to display additional information, as indicated below.
DVD TT 5/8 CH
1/5 ENG 5.1 CH
TT 5/8 – "5 / 8" indicates the fifth of 8 titles on the DVD is currently playing.
CH 2/16 – "2 / 16" indicates that the second of 16 chapters on the DVD is currently
playing.
Press repeatedly to view the following information: for elapsed/remaining playing time:
• 00:02:18 – total elapsed playing time for disc
button (28) on the remote control to display
2/16 – 00 :33 :34
1/4 ENG OFF