The front of this unit should only be cleaned with a slightly damp cloth. Do not in this owner’s manual clear and easy to follow. If you take a few minutes to look use cleansers. through it, you’ll learn how to use all the features of your new Jensen receiver for Ÿ Use Recommended Accessories.
JWM70A DISC NOTES Depending on the recording status, conditions of the disc, and the equipment used for recording, some CD-Rs/CD-RWs may not play on this unit. For more reliable playback, please adhere to the following recommendations: Use CD-RWs with speed 1x to 4x and write with speed 1x to 2x.
To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to installation. NOTE: If the JWM70A is to be installed in a vehicle equipped with an on- board drive or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the computer memory may be lost.
JWM70A WIRING WARNING: Wiring harness comes with stripped and tinned leads to aid in the installation process. Any unused speaker wires must have their exposed ends cut The wiring diagram depicts all the wiring connections required for proper off or insulated individually.
JWM70A Mode BASIC OPERATION 1. Press the MODE button (15), the LCD will display “MODE” and access mode selection. 2. Press the MODE button, |<< or >>| buttons (6, 8), or rotate the VOL/ENTER knob to cycle through the available modes and choose the desired mode. Available modes are AM, FM, FRONT AUX, REAR AUX, HDMI ARC, DISC and USB.
Dimming control Use a ball point pen or thin metal object to press the RESET button (3). Connect HDMI cable to JENSEN TV with ARC function and JWM70A radio head unit. 1. Press the button (17) on the front panel to turn the dimmer On (selected...
Page 9
JWM70A See the ARC function Operation in the following table: Device Status User Operation Operation Results Remarks Head Unit Head Unit Power ON (HDMI Power ON Power OFF Power OFF TV Power OFF ARC) Power ON Power OFF Power OFF...
JWM70A TUNER OPERATION 4.Press the BACK button (2) to exit presets menu. Recall preset stations 1.Press the PRESETS button (13) to access the preset menu. 2. Press |<< or >>| buttons (6, 8) or rotate the VOL/ENTER knob to navigate the 6 preset stations.
JWM70A DISC OPERATION Track Select Press the >>| or |<< button (8, 6) to advance to the previous or next track on the CD. The selected track number will appear on the display. Press and hold the >>| or |<<...
JWM70A Play/ Pausing Playback 2. Use the cursor buttons (15) on the remote control to access the fields on the “PROG” screen. Press the II button (7) to suspend or resume disc play. 3. Use the number buttons on the remote control to enter a track number in Stop Playback each field.
Page 13
JWM70A Programmed Playback 1. Press the PROG button (7) on the remote control to access the programmed playback screen. TT 5/8 – “5 / 8" indicates the fifth of 8 titles on the DVD is currently playing. CH 2/16 – “2 / 16" indicates that the second of 16 chapters on the DVD is currently playing.
JWM70A MP3/USB OPERATION Maximum number of MP3 files: 999 Maximum number of characters for MP3 file name and folder name: 32 Maximum number of Characters of ID3 Tag: ID3 Tag version 1.0: 32 ID3 Tag version 2.x: 32 MP3 Monitor Display After loading an MP3 disc or USB device, the following screen will appear on your output Monitor.
Page 15
JWM70A GOTO Direct Track/Chapter Access 4.Press the ENTER knob (4) to confirm selection. 5.Press the BACK button (2) to confirm your selection and exit time menu. The Use the GOTO function to access a track (chapter) directly. unit will automatically exit the playback menu after 5 seconds of inactivity.
PAIRbutton (9) to enter Bluetooth mode. 2. Press & Hold PAIR button to start Bluetooth pairing process. The JWM70A will display "PAIRING" and will be available to pair for 120 seconds. 3. In your device Bluetooth settings, select"JWM70A" to connect. Answering a Call When answering a call using the connected phone, BT AUDIO will pause.
During playback, press the ▶II button (7) to pause the Bluetooth audio JENSEN stereo system. Store away your old remote and enjoy the convenience of all playback. “BT PAUSE” will appear on the LCD. Press ▶II button again to resume the primary functions of your JENSEN stereo right from your phone or tablet by playback.
JWM70A REMOTE CONTROL OPERATION DESCRIPTION TUNER BLUETOOTH CD/MP3/USB LOUD Turn radio on/standby Turn radio on/standby Turn radio on/standby Turn radio on/standby Power mode. mode. mode. mode. ALARM Adjust volume up/down. Adjust volume up/down. Adjust volume up/down. Adjust volume up/down. VOL +/-...
Page 19
JWM70A Press to view title TITLE menu. Use directional arrows and play button to play selected title. May not be supported by all discs. Repeat track Repeat chapter Select source for Select source for Select source for Select source for...
JWM70A DVD SETUP MENU Lanuage Setup Press the (setup) button (10) on the remote control to access the SETUP The Language Setup menu controls the following features: menu and adjust system settings for the following categories: System Setup Language Setup...
JWM70A Video Setup The Video Setup menu controls the following features: – Brightness Contrast – – Saturation – Sharpness – Digital Setup The Speaker Setup menu controls the following features: OP Mode: Select LINE OUT or RF REMOD. – Dynamic Range: Select FULL, 6/8, 4/8, 2/8 or OFF.
JWM70A CARE AND MAINTENANCE TROUBLESHOOTING – Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Symptom Solution Keep the product away from dust and dirt, which can cause premature wear –...
JWM70A SPECIFICATIONS FCC Notice NOTE: This equipment has been tested and found to comply with the limits for a FM Tuner Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are Frequency Coverage (USA) ......87.5 to 107.9 MHz designed to provide reasonable protection against harmful interference in a Frequency Coverage (Europe) .