Adjusting The Bass; Switching Display; Adjusting The Treble; Adjusting The Balance - Clarion DB348RMP Owner's Manual

Basic Operations

Adjusting the bass

1. Press the [A-M] button and select "BASS".
2. Turning the [ROTARY] knob clockwise em-
phasizes the bass; turning it counterclock-
wise attenuates the bass.
The factory default setting is "0". (Adjustment
range: –7 to +7)

Adjusting the treble

1. Press the [A-M] button and select "TREB".
2. Turning the [ROTARY] knob clockwise em-
phasizes the treble; turning it counterclock-
wise attenuates the treble.
The factory default setting is "0". (Adjustment
range: –7 to +7)

Adjusting the balance

1. Press the [A-M] button and select "BAL".
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
The factory default setting is "0". (Adjustment
range: L13 to R13)

Adjusting the fader

1. Press the [A-M] button and select "FAD".
2. Turning the [ROTARY] knob clockwise em-
phasizes the sound from the front speakers;
turning it counterclockwise emphasizes the
sound from the rear speakers.
The factory default setting is "0". (Adjustment
range: F12 to R12)
Note:
• Bass and Treble can only be adjusted when the
"Z-enhancer" is off.
Turning on/off MAGNA BASS EX
To adjust the MAGNA BASS EX
The MAGNA BASS EX does not adjust the low
sound area like the normal sound adjustment
function, but emphasizes the deep bass sound
area to provide you with a dynamic sound.
The factory default setting is off. Press and hold
the [A-M] button for 2 second or longer to turn the
MAGNA BASS EX and "M-B EX" in the display
lights on or off.
12
DB348RMP

Switching display

Press and hold the [BND] button, and then press
the [DISP] button to select the desired display.
The display switches in the following order:
Main Clock (CT) Main ...
If the display is changed by other button opera-
tion when the clock (CT) is displayed, the clock
display returns automatically after the operation.
The example shows the display in radio mode.
Main display
Clock(CT) display
Main display
CT (Clock Time) function
The CT function enables you to display clock
time only when CT data is received.
Press and hold the [BND] button, and then
press the [DISP] button, the display switches to
CT (Clock Time).
When no CT data is received, "CT––:––" appears
in the display.
Note:
• There are some countries and stations where
clock time data are not transmitted. In some ar-
eas, the CT may not be displayed correctly.
Triggered audio mute for cellular
telephones
This unit requires special wiring to mute the au-
dio signal automatically when a cellular tele-
phone rings in the car.
This function is not compatible with all cellular
telephones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
The factory default setting is "TEL OFF".
Press and hold the [BND] button, and then
press the [s] to select the "TEL MUTE" or
"TEL OFF".