Basic Operations; Adjusting The Bass; Adjusting The Tone - Clarion ProAudio DXZ725 Owner's Manual

Basic Operations

Setting the Beat EQ
This unit are provided with 5 types of sound tone ef-
fects stored in memory. Select the one you prefer.
The factory default setting is "USER CUSTOM".
Each time you press the [BEQ] button, the tone
effect changes in the following order:
"BASS BOOST" "IMPACT"
"USER CUSTOM" "TONE BYPASS"
"BASS BOOST" ...
• BASS BOOST : bass emphasized
• IMPACT : bass and treble empha-
sized
• EXCITE : bass and treble empha-
sized mid de-emphasized
• USER CUSTOM : user custom
• TONE BYPASS : no sound effect

Adjusting the tone

Press the [A] button and select the item to ad-
just. Each time you press the [A] button, the
item changes in the following order:
When "BASS BOOST" is set
"NON-FAD VOL" "BASS BOOST"
"BALANCE" "FADER"
mode.
When "IMPACT" is set
"NON-FAD VOL" "IMPACT"
ANCE" "FADER"
When "EXCITE" is set
"NON-FAD VOL" "EXCITE"
ANCE" "FADER"
When "USER CUSTOM" is set
"NON-FAD VOL" "BASS <GAIN>"
<GAIN>" "TREB<GAIN>"
"FADER" Last function mode.
When "TONE BYPASS" is set
"NON-FAD VOL" "BALANCE"
Last function mode.
Pressing the [BEQ] button for 1 second or longer
while in "USER CUSTOM" sets flat, and displays
a "BEQ FLAT" message.
Note:
• When the separately-sold digital sound processor
(DPH910) is used, the bass and treble tone ad-
justments cannot be made. To adjust the tone, re-
fer to the section "DSP Operations".
14
DXZ725
"EXCITE"
Last function
"BAL-
Last function mode.
"BAL-
Last function mode.
"MID
"BALANCE"
"FADER"
Adjusting the non fader output
volume
You can adjust the volume output from the unit's
non fader output terminal.
1. Press the [A] button and select "NON-FAD
VOL".
2. Turning the [ROTARY] knob clockwise in-
creases the output volume; turning it counter-
clockwise decreases the output volume.
The factory default setting is "0". (Setting
range: –6 to 6)
3. When the adjustment is complete, press the
[A] button several times until the function
mode is reached.

Adjusting the bass

The bass gain, bass F (center frequency) and
bass Q can be adjusted as follows.
1. Press the [A] button and select "BASS
<GAIN>".
2. Press the [a] or [d] button and select from
"BASS <GAIN>"
"BASS <Q 1>" "BASS <GAIN>".
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed and adjust the gain,
the F (center frequency) and the Q.
BASS GAIN : –6 to 8 (The factory default
setting is "0")
BASS F : 50Hz/80Hz/120Hz (The fac-
tory default setting is "50")
BASS Q : 1/1.25/1.5/2 (The factory de-
fault setting is "1")
4. When the adjustment is complete, press the
[A] button several times until the function
mode is reached.
Adjusting the MID
The MID gain, MID F (center frequency) and
MID Q can be adjusted as follows.
1. Press the [A] button and select "MID
<GAIN>".
2. Press the [a] or [d] button and select from
"MID <GAIN>" "MID <F 1k>"
2>" "MID <GAIN>".
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed and adjust the gain,
the F (center frequency) and the Q.
MID GAIN : –6 to 6 (The factory default
setting is "0")
"BASS <F 50>"
"MID <Q