Function Indicator Symbols - Symphonic CSHP80G Service Manual

FUNCTION INDICATOR SYMBOLS

Note: If an error occurs, a message with the error number appears on the screen.
Message Error No. Error Description
03-50
Recording
error 03-56
03-57
02-50
02-52
System error 02-54
02-57
02-59
Recording Error
Recording error This code is output when recording error caused by media error
caused by media occurs, e.g.,stopping recording during attempting to record on a
error scratched disc.
This code is output when a number of errors occur:
Ex.1) When Outplay list creation fails.
Ex.2) When the system can't take the title information which should
General error
be written on the disc.
Ex3) When starting to copy, recording is paused and restarted but,
after the recording pause, recording start fails.
This code is output when an HDD operation error occurs (HDD
Device error
recording error), while copying at high speed or constant speed.
Erasing error (all This code is output when an error occurs erasing entire VR playlist,
titles) HDD playlist or HDD originals.
This code is output when HDD formatting occurs in maintenance
Format failure
mode.
Abnormal HDD This code is output when a [PLAY], [STOP], [REC], [MENU] or [LIST]
mount button is pressed while HDD is not functional.
This code is output when fan locking (over 30 seconds) is detected.
Fan lock
After the error message is displayed, the power turns off.
This code is output when HDD hang-up event occurs. After the error
HDD hang-up
message is displayed, the power turns off.
Error message
Error No.
02-50
Error Example
1-9-1 E41A1FIS