Table of Contents
Advertisement
<DVD Section>
1. Turn the power on and remove the disc on the tray.
2. To put the unit into version up mode, press [DVD],
[9], [8], [7], [6], and [SEARCH] buttons on the
remote control unit in this order. The tray will open
automatically.
Fig. a appears on the screen and Fig. b appears
on the VFD.
" ******* " differ depending on the models.
F/W Version Up Mode
Please insert a DISC
for F/W Version Up.
Fig. a Version Up Mode Screen
Fig. b VFD in Version Up Mode
The unit can also enter the version up mode with
the tray open. In this case, Fig. a will be shown on
the screen while the tray is open.
3. Load the disc for version up.
4. The unit enters the F/W version up mode
automatically. Fig. c appears on the screen and
Fig. d appears on the VFD. If you enter the F/W for
different models, "Disc Error" will appear on the
screen, then the tray will open automatically.
" ******* " differ depending on the models.
F/W Version Up Mode
VERSION : ************.ab6
Reading...
(*1)
Fig. c Programming Mode Screen
Fig. d VFD in Programming Mode (Example)
The appearance shown in (*1) of Fig. c is
described as follows:
FIRMWARE RENEWAL MODE
Model No : *******
VERSION : *.**
EXIT: POWER
Model No : *******
VERSION : *.**
No.
Appearance
1
Reading...
2
Erasing...
3
Programming... Writing new version data
5. After programming is finished, the tray opens
automatically. Fig. e appears on the screen and
the checksum in (*2) of Fig. e appears on the VFD
(Fig. f).
" ******* " differ depending on the models.
F/W Version Up Mode
VERSION : ************.ab6
Completed
(*2)
SUM : 7ABC
Fig. e Completed Program Mode Screen
Fig. f VFD upon Finishing the Programming Mode (Example)
At this time, no button is available.
6. Remove the disc on the tray.
7. Unplug the AC cord from the AC outlet. Then plug
it again.
8. Turn the power on by pressing the [POWER]
button and the tray will close.
9. Press [DVD], [1], [2], [3], [4], and [DISPLAY]
buttons on the remote control unit in that order.
Fig. g appears on the screen.
" ******* " differ depending on the models.
MODEL : *******
Version : *.**
Region : *
EEPROM CLEAR : CLEAR
1-8-1
State
Sending files into the memory
Erasing previous version data
Model No : *******
VERSION : *.**
EXIT: POWER
Fig. g
E41A1FW
Advertisement
Table of Contents
