Symphonic CSHP80G Service Manual page 20

10. Press [CLEAR] button on the remote control unit.
Fig. h appears on the screen.
" ******* " differ depending on the models.
MODEL : *******
Version : *.**
Region : *
EEPROM CLEAR : OK
EEPROM CLEAR : CLEAR
Fig. h
<HDD Section>
1. Items necessary to use G6 Serial Firm
Up Software:
G6_SerialFwUp_Ver002.EXE
Save the above file into the local folder.
2. To change to the maintenance mode of
the DVR with DVD Player:
1. Connect the DVR with DVD Player and a PC in
serial.
2. Change the DVR with DVD Player to maintenance
mode.
3. Using the [CHANNEL] up/down buttons on the
remote control, select "4:SERIAL UPDATE" and
press [ENTER] on the remote control.
4. When "Please Press Enter Key" is displayed,
press [ENTER] on the remote control.
5. When the progress bar is displayed, the change is
complete on the DVR with DVD Player.
EXIT: POWER
1-8-2
When "OK" appears on the screen, the factory
default will be set. Then the firmware renewal
mode is complete.
11. To exit this mode, press [POWER] button.
3. To start up the G6 Serial Firm Up
Software:
Com 1 has been selected as the default for the G6
Serial Firm Up Software.
Flash Write tab Flash Write tab
Fig. i
E41A1FW