Adjusting The High Pass Filter - Clarion CX201 Owner's Manual

Basic Operations
3-1. Each time you turn the [ROTARY] knob to
select the setting, the setting changes in
the following order:
"THROUGH" ↔ "60" ↔ "90" ↔ "120"
∗ The factory default setting is
● Adjusting the subwoofer output
volume
You can adjust the volume output from the unit's
subwoofer output terminal.
This adjustment can be performed only when
the "REAR/S-W" is set to "S-WOOFER".
2-1. Select "S-W VOL".
3-1. Turn the [ROTARY] knob to increase or
decrease the subwoofer volume.
∗ The factory default setting is
(Adjustment range: +6 to –6)
● Setting the phase
This set can be performed only when the
"REAR/S-W" is set to "S-WOOFER".
2-1. Select "PHASE".
3-1. Turn the [ROTARY] knob to select as
following order:
"NORMAL" ↔ "REVERSE"
∗ The factory default setting is "
● Adjusting the high pass filter
2-1. Select "HPF".
3-1. Each time you turn the [ROTARY] knob to
select the setting, the setting changes in
the following order:
"THROUGH" ↔ "60" ↔ "90" ↔ "120"
∗ The factory default setting is "THROUGH"
(through).
Note:
• During SOUND adjustment mode, if no operation
is performed for more than 10 seconds, this
mode can be cancelled and return to previous
mode.
"THROUGH
".
"0
".
NORMAL
".
11
CX201