Table of Contents
Advertisement
PROBLEM
Cakes high in middle with
crack on top.
Pie crust edges
too brown.
Other F__ Error appears
in the display window.
The oven display won't
turn on.
The cooling fan
continues to run after
the oven is turned off.
Oven is not heating.
Oven is not
cooking evenly.
Oven light is not
working properly.
Clock and timer are not
working properly.
Excessive moisture.
Turning off demo mode.
TROUBLESHOOTING
POSSIBLE CAUSES / SOLUTION
Baking temperature is too high.
Baking time is too long.
Baking pans are touching each other or oven walls.
Rack position is incorrect.
Baking pan size may be too small.
Batter is over-mixed
Oven temperature too high.
Edges of crust is too thin.
Remove power and turn it back on again after a few seconds.
If condition persists, note the code number (refer to 'Event
logs') and contact Customer Care or a Fisher & Paykel trained
and supported service technician.
Turn off power at the main power supply, then turn the power
back on.
If this does not resolve the issue, call Customer care or
Fisher & Paykel trained and supported service technician.
The fan will turn off automatically when the electronic
components have cooled sufficiently.
Check the circuit breaker or fuse box to your house.
Check that power is being supplied to the oven.
Make sure the oven temperature has been selected.
Always reduce recipe temperature by 15°C when baking with
.
FAN HEAT
Check that power is being supplied to the oven.
Refer to the 'First use' section of this user guide.
Make sure there is proper electrical power to the oven.
Using the convection mode will eliminate any moisture in
the oven.
To disable the function, press the arrows
display page and select off. Confirm your selection
DEMO
by pressing
.
to enter the
37
Advertisement
Table of Contents
