Table of Contents
Advertisement
Out of Balance Recovery
1 Enter Option Adjustment mode.
2 Select the HANDWASH
3 Touch the MORE
or off.
End of Cycle Beeps:
1 Enter Option Adjustment mode.
2 Select the SHEETS
3 Touch the MORE
no beeps to sound at the end of the cycle.
Factory
Reset:
This resets any customisation and option settings back to the factory defaults
1 Enter Option Adjustment mode.
2 Select the EASY IRON
3 The LED display will show "rst". Touch and hold the START/PAUSE
button until the machine powers off to reset the washer.
To exit without resetting, touch the POWER button.
button to turn AUTOMATIC RECOVERY on
Out of balance recovery routine
cycle
button to increase the number of beeps or for
Modifying the number of beeps to signal the end of cycle
Changing the washer settings back to the factory default
cycle
cycle
42
Advertisement
Table of Contents
