Table of Contents
Advertisement
d 05: Cycle Position at Last Fault
The Wash Cycle position of the last fault is displayed via the screen.
d 06: Water Temperature (Degrees C)
The Wash Temperature at the thermistor in
which is multiplied by 2
d 07: Cycle Count
The total number of Wash Cycles is displayed via the screen which will
display the 100's, 10's & 1's when all 3 segments are on and the 10,000's &
1,000's when only 2 segments are on with the displayed output toggling
between the 2 screens every 2 seconds.
E.g. For a cycle count of 1010 cycles
Represent 100's, 10's & 1's. &
Note: The wash cycle count is only incremented at the end of the spin
cycle.
Output Displayed
on Screen
00
01
02
03
04
05
06
0 1 0
2 second later
Cycle Position
Agitation
Rinse
Spin
O
C is displayed via the screen
0 1
10,000's & 1,000's =01,010 cycles
14
Advertisement
Table of Contents
