Fisher & Paykel WD8060P1 Troubleshooting Manual page 9

Problem Possible Causes
New items have been
dried in the washer dryer
recently.
Delicate items not dried
on an appropriate cycle.
Metal parts on the items
or in the load.
Fabric
damage Items not separated or
dried on an appropriate
cycle for the fabric type.
'Dryness Level' selected
not appropriate for the
fabric type.
Instructions on care label
not followed.
Washer dryer
overloaded.
Incorrect cycle for
load type.
Spin speed too
fast.
Creasing
Wet clothes left in
washer dryer or
laundry basket.
Wash temperature
too hot for load
type.
Items not sorted
correctly.
https://producthelp.fisherpaykel.com/eu/Wash/Front_Loaders/Washer_Dryer_Combo/WD8060P1/User_Guide_WD8060P1/16...
New towels or flannelette sheets can leave lint in the dryer, which may be
picked up by subsequent loads.
Dry delicate items on a 'Delicate' cycle (refer to 'Sorting & Loading', 'Wash
& Dry Cycles').
Fasten zips and other clasps before placing items in the washer dryer.
Dry similar items together. Ensure an appropriate cycle is selected (refer to
'Sorting & Loading').
Ensure the 'Dryness Level' selected is appropriate for the fabric type. Refer
to the items care label (refer to 'Wash & Dry Cycles').
Follow the instructions on the care label of the items.
Do not overload washer dryer
Use specified cycle for particular load type and add on 'Wrinkle Free' option to
your cycle.
Select a slower spin speed.
Laundry left sitting wet is more likely to crease. If not removing clothes from
washer dryer immediately at end of cycle, select the 'Wrinkle Free' option. Do not
leave wet washing sitting in a washing basket.
Select a lower wash temperature. Check items care label for correct care.
Sort load so that items of similar weight are washed and dried together (refer to
'Sorting & Loading').
What To Do
Updated: Wed, 17 Nov 2021 19:03:07 GMT
Powered by
9