Fisher & Paykel WD8060P1 Troubleshooting Manual page 6

Problem
Solving Washer Problems
Problem Possible Causes
Incorrect type of
detergent used.
Too many
soap suds
Too much detergent
used.
Incorrect wash cycle
selected.
Insufficient
detergent.
Washer dryer
overloaded.
Poor soil
Load was
Removal
particularly dirty.
Items not sorted
correctly.
Washer dryer dirty
from previous wash
or dry cycle.
https://producthelp.fisherpaykel.com/eu/Wash/Front_Loaders/Washer_Dryer_Combo/WD8060P1/User_Guide_WD8060P1/16...
Possible Causes
New or non-colourfast
items not washed
separately.
Wet items have been
left sitting for too long.
Wash temperature.
Use low sudsing, front loader detergent only (refer to 'Detergent & Fabric
Softener').
Ensure the correct dose of detergent is used for the load size and soil level
(refer to 'Detergent & Fabric Softener').
Select a wash cycle that is appropriate for the amount of dirt (refer to 'Sorting
& Loading').
Ensure the correct dose of detergent is used for the load size and soil level
(refer to 'Detergent & Fabric Softener').
Ensure the washer dryer is not overloaded in terms of its capacity or the
cycle selected (refer to 'Sorting & Loading').
Select 'Pre Wash' for particularly dirty loads (refer to 'Wash & Dry Cycle
Options').
Wash heavily and lightly soiled garments separately
After washing particularly dirty clothing, we recommend putting the washer
dryer through a 'Rinse' cycle after the load has been removed, to wash away
any remnants of dirt and to prevent it contaminating future wash or dry
cycles.
What To Do
Wash non-colourfast items separately and select
'Cold' wash temperature.
Remove items from washer dryer as soon as the
cycle is finished, or if items are not to be removed
from the washer dryer immediately, select 'Wrinkle
Free'.
Consider the wash temperature you select for your
coloured items. Lower the temperature if you are
concerned.
What To Do
Updated: Wed, 17 Nov 2021 19:03:07 GMT
Powered by
6