Service Access; Moisture Protection - Fisher & Paykel DOUBLE DISHDRAWER DD60DTX6I1 Installation Manual

SERVICE ACCESS

We recommend locating the service holes on either side of the DishDrawer™ Dishwasher as
z
shown below.
If the holes are created through wood, ensure the edges are smooth and rounded
z
If the holes are created through metal, ensure the supplied edge protector is fitted.
z
SERVICE HOLE DIMENSIONS
A Maximum distance between rear of cavity and service hole
B Maximum distance between floor and service hole
C Minimum diameter of service hole
10
PREPARATION
REAR
WALL
Hole
location
INSIDE created
PLAN
WALL to suit
cabinetry
C
A
C
REAR
PROFILE
WALL
B
FLOOR
1
10mm
For best results, we recommend installing the supplied sound seal to reduce the possibility of
any excess noise occurring during daily use.
1
MM
5
2
10
57

MOISTURE PROTECTION

Align the supplied moisture protection
tape to the cabinetry as illustrated
Ensure this area is free of debris
before carefully applying the tape to
the surface.
SOUND SEAL (OPTIONAL)
Cavity height of 864 – 874mm
Lay the sound seal flat, do not fold.
Cavity height of 874mm +
Fold the sound seal as illustrated.
Gently tilt the DishDrawer™ Dishwasher
back and align the seal to the front feet.
Carefully lower product and ensure seal
is still positioned correctly.