Mail Operation; I General; I Operation - Icom IC-M802 Instruction Manual

I General

The IC-M802 is ready for HF e-mail operation— up to
160 e-mail frequency channels and a connecting ter-
minal for an e-mail modem are available.
Independent e-mail frequencies with operating mode
and filter settings can be selected with a push of a but-
ton or group/channel selector rotation for simple oper-
ation.

I Operation

q Connect your PC via an e-mail modem to
[AF/MOD] on the IC-M802 main unit front panel.
• See page 53 for connection details.
w Start up the e-mail application.
• Set up the necessary information given from your
provider for e-mail operation in advance.
e Push [e-mail] then rotate [GRP] and [CH] to select
the desired e-mail channel.
NOTE: E-mail mode cannot be accessed from
DSC watching mode. Select regular voice oper-
ation mode by pushing [DSC] in advance.
• Pushing [Y]/[Z] on the microphone also selects the
channel.
• [GRP] rotation changes in 20-channel increments.
• Selectable e-mail frequencies may differ according to
your provider.
[e-mail]
E-MAIL OPERATION
NOTE: For e-mail operation, you MUST make a
contract with an HF e-mail provider and purchase
an e-mail modem from the provider or your dealer.
E-mail frequencies may need to be programmed by
your dealer depending on your modem selection.
Ask your dealer for more details.
r Follow the e-mail application instruction for e-mail
reception and transmission.
11
10
11
47