Dsc Preparation; I Mmsi Code Programming - Icom IC-M802 Instruction Manual

I MMSI code programming

The 9-digit MMSI (Maritime Mobile Service Identity:
DSC self ID) code can be programmed.
D D Programming
[DSC]
[CH]
q While pushing [F] and [DSC], push [POWER] to
turn the power ON.
w Push [DSC] to select DSC watch mode.
e Push [MODE
].
SET
• DSC menu is selected as follows.
r Rotate [CH] to select "
Ç
t Rotate [CH] to select "
[ENT].
Ç
[MODE ] [ENT]
SET
[F] [POWER]
," then push [ENT].
," then push

DSC PREPARATION

This operation is not necessary when the MMSI
code has been programmed by your dealer. How-
ever, the code re-programming can be performed 2
times only. This code is displayed when the power is
turned ON.
y Enter the specified 9-digit MMSI code via the key-
pad.
• Make sure the correct code is entered.
• Rotate [CH] to move the cursor.
u Push [ENT] to program the code.
• After pushing [ENT], return to the display as described
in step t.
i Push [MODE
] to exit the DSC menu.
SET
6
5
6
15