Dsc Menu Operation; I General; I Id Input - Icom IC-M802 Instruction Manual

10

DSC MENU OPERATION

I General

Up to 100 ID codes with frequency and name can be
programmed in MENU mode for easy recall during
DSC call setting.

I ID input

A total of 100 ID codes can be programmed as "Ad-
dress ID" (for ships and coast stations) and "Group ID"
(for group stations). A pair of frequencies (both transmit
and receive) and ID name are also programmed to-
gether with the ID code which are used as call fre-
quencies when using the ID code.
D D SETTING PROCEDURES:
q During DSC menu indication, rotate [CH] to select
" " then push [ENT] to select setup menu.
• The select screen is displayed as below.
Ç
w Rotate [CH] to select the "
" ," then push [ENT].
• The address/group ID list screen is displayed.
Ç
When the memory is full:
"
indication when 100 ID codes have been pro-
grammed.
Delete any unnecessary IDs in such cases (see p.
46 for delete).
e Rotate [CH] to select "
• The address/group ID setup screen is displayed.
44
" is displayed beside "
" then push [ENT].
In addition, the following settings/operation are avail-
able in DSC setup menu.
• Manual position/time setting (p. 16)
• Self-ID (MMSI code) indication (described in this sec-
tion)
r Push the numeral keys to input the desired 10-digit
ID name, 9-digit code and both transmit and re-
ceive frequencies, then push [ENT].
• Rotate [CH] to move the cursor.
• When entering group code, enter "0 (zero)" for the first
digit.
• The frequencies entered should be within the marine
frequency ranges as follows.
1.6– 2.9999 MHz
6.0– 6.9999 MHz
12.0–13.9999 MHz
" or 18.0–19.9999 MHz
25.0–27.5000 MHz
t Push [ENT] to program the contents into the ad-
dress or group ID.
• Returns to the address/group ID list screen automati-
"
cally.
• The ID list is displayed in alphabetical order for ID
name, so [CH] rotation may be necessary for the pro-
grammed ID confirmation.
Ç
y Push [MODE
or push [FREQ/CH] to return to the select screen.
4.0– 4.9999 MHz
8.0– 8.9999 MHz
16.0–17.9999 MHz
22.0–22.9999 MHz
] to return to DSC watch mode,
SET