Enabling Menus; Error Reading Usb Drive; Empty Hole Punch Box; Enter Pin - Ricoh InfoPrint 1767 User Manual

Disk recovery takes place in several phases. The percentage completed during each phase appears on the display.

Empty hole punch box

Empty the hole punch box, and then reinsert it into the finisher. Wait for the message to clear.
repeatedly until Show Me appears, and then press
Note: To learn how to empty the hole punch box, press .

Enabling Menus

Wait for the message to clear.
Encrypting disk x/y XX% DO NOT POWER OFF
Wait for the message to clear.
Warning: Do not power off while the printer is encrypting the printer hard disk.
The percentage completed appears on the display.

Enter PIN

Enter the PIN you created in Print Properties when the confidential job was sent for printing.

Enter PIN to lock

Enter the PIN you created to lock the control panel and prevent menu changes.

Error reading USB drive

Remove the device and wait for the message to clear. The USB drive may be corrupted.

Flushing buffer

Wait for the message to clear.
Formatting Disk x/y XX% DO NOT POWER OFF
Wait for the message to clear.
Warning: Do not power off while the printer is formatting the printer hard disk.
The percentage completed appears on the display.
Formatting Flash DO NOT POWER OFF
Wait for the message to clear.
Warning: Do not power off while the printer is formatting the flash memory.

Incorrect orientation

Change the orientation of the paper in the tray or the position of the paper guides. Make sure the print job is requesting
the correct paper size.

Insert hole punch box

Insert the hole punch box into the finisher. Wait for the message to clear.
Note: To learn how to insert the hole punch box, press repeatedly until Show Me appears, and then press .
Insert Tray <x>
Insert the specified tray into the printer.
110