Table of Contents
Advertisement
Menu item
Separator Sheets
None
Between Copies
Between Jobs
Between Pages
Separator Source
Tray <x>
MP Feeder
Multipage Print
Off
2 Up
3 Up
4 Up
6 Up
9 Up
12 Up
16 Up
Multipage Order
Horizontal
Vertical
Reverse Horizontal
Reverse Vertical
Multipage View
Auto
Long Edge
Short Edge
Multipage Border
None
Solid
Description
Specifies whether blank separator sheets are inserted
Notes:
•
None is the factory default setting.
•
Between Copies inserts a blank sheet between each copy of a print job if
Collation is set to On. If Collation is set to Off, a blank page is inserted between
each set of printed pages, such as after all page 1's, all page 2's, and so on.
•
Between Jobs inserts a blank sheet between print jobs.
•
Between Pages inserts a blank sheet between each page of the print job. This
setting is useful when printing transparencies or inserting blank pages in a
document for notes.
Specifies the paper source for separator sheets
Notes:
•
Tray 1 (standard tray) is the factory default setting.
•
From the Paper menu, Configure MP must be set to Cassette in order for MP
Feeder to appear as a menu setting.
Specifies that multiple-page images be printed on one side of a sheet of paper.
This is also referred to as N-up or Paper Saver.
Notes:
•
Off is the factory default setting.
•
The number selected is the number of page images that will print per side.
Specifies the positioning of multiple-page images when using Multipage Print
Notes:
•
Horizontal is the factory default setting.
•
Positioning depends on the number of images and whether the images are
in portrait or landscape orientation.
Specifies the orientation of a multiple-page sheet
Notes:
•
Auto is the factory default setting. The printer chooses between portrait and
landscape.
•
Long Edge uses landscape.
•
Short Edge uses portrait.
Prints a border around each page image when using Multipage Print
Note: None is the factory default setting.
85
Advertisement
Table of Contents
