IBM ThinkPad X20 Supplementary Manual page 82

This equipment does not meet Telecom's impedance requirements.
Performance limitations may occur when used in conjunction with some parts
of the network. Telecom will accept no responsibility should difficulties arise
in such circumstances.
The code for Call Waiting disable is *52 on the Telecom New Zealand
telephone network.
For the modem with approval number PTC 211/99/020
v The grant of a Telepermit for any item of terminal equipment indicates only
that Telecom has accepted that the item complies with minimum conditions
for connection to its network. It indicates no endorsement of the product by
Telecom, nor does it provide any sort of warranty. Above all, it provides no
assurance that any item will work correctly in all respects with another item
of Telepermitted equipment of a different make or model, nor does it imply
that any product is compatible with all of Telecom's network services.
v This equipment is not capable, under all operating conditions, of correct
operation at the higher speeds for which it is designed. Telecom will accept
no responsibility if difficulties arise in such circumstances.
v This device is equipped with pulse dialling, whereas the Telecom standard
is DTMF tone dialing. There is no guarantee that Telecom lines will always
continue to support pulse dialling.
v Use of pulse dialling, when this equipment is connected to the same line as
other equipment, may give rise to bell tinkle or noise and may also cause a
false answer condition. If such problems occur, the user should NOT
contact the Telecom Faults Service.
v This equipment shall not be set to make automatic calls to the Telecom 111
Emergency Service.
v This equipment might not provide for the effective hand-over of a call to
another device connected to the same line.
v This equipment must not be used under any circumstances that might
constitute a nuisance to other Telecom customers.
v Some parameters required for compliance with Telecom's Telepermit
requirements are dependent on the software. In order to operate within the
limits for compliance with Telecom's specifications, the software shall be set
to ensure that calls are answered between 3 and 30 seconds of receipt of
ringing.
v All persons using this device for recording telephone conversations shall
comply with New Zealand law. This requires that at least one party to the
conversation is to be aware that it is being recorded. In addition, the
Principles enumerated in the Privacy Act 1993 shall be complied with in
respect to the nature of the personal information collected, the purpose for
its collection, how it is to be used, and what it disclosed to any other party.
72
®
ThinkPad X Series Service and Troubleshooting Guide