Replacing The Hard Disk Drive - IBM ThinkPad X20 Supplementary Manual

Replacing the hard disk drive

You can increase the storage capacity of your computer by replacing the hard
disk drive with one of greater capacity. You can purchase a new hard disk
drive from your IBM reseller or IBM marketing representative, or by visiting
IBM on the Web.
Note: Replace the hard disk drive only if you upgrade it or have it repaired.
Attention: Handling a hard disk drive:
v Do not drop the drive or subject it to physical shocks.
v Do not apply pressure to the cover of the drive.
v Do not touch the connector.
The drive is very sensitive. Incorrect handling can cause damage and
permanent loss of data on the hard disk. Before removing the hard-disk drive,
make a backup copy of all the information on the hard disk, and then turn
the computer off. Never remove the drive while the system is operating, in
standby mode, or in hibernation mode.
To replace the hard disk drive, do the following:
1. Turn off the computer; then disconnect the ac adapter and all cables from
2. Close the computer display, and turn the computer upside down.
3. Remove the battery pack.
4. Remove the screw that secures the hard disk drive (1).
5. Remove the hard-disk drive by pulling the cover away from the
The connectors and bay of the hard disk drive were not designed for
frequent changes, or drive swapping.
the computer.
3-1
3-2
3-1
3-1
computer (2).
Solving computer problems
3-2
3-2
3-2
1
2
Chapter 2. Solving computer problems
31