IBM ThinkPad X20 Supplementary Manual page 42

Solving computer problems
6. Detach the hard disk drive cover (3–1).
7. Remove the screws and detach the old hard disk drive from the plate
8. Replace the new hard disk drive to the plate hard disk and reinstall the
9. Attach the cover to the new hard disk drive.
10. Insert the new hard disk drive and its cover into the hard disk drive bay;
11. Reinstall the screw that secures the hard disk drive.
12. Reinstall the battery pack.
13. Turn the computer right side up. Connect the ac adapter and cables to
32
®
ThinkPad X Series Service and Troubleshooting Guide
hard disk (3–2).
screws.
then secure it firmly into place.
Note: Make sure that the label on the hard disk drive is facing the
bottom of the computer.
the computer.