Fisher & Paykel OR90SCI6 User Manual page 78

Cooktop
PROBLEM
Fan noise coming from
the cooktop.
Oven fan comes on while
using the cooktop.
Pans do not become
hot and appears in
the display.
P
flashes in the display
when you are trying to set
PowerBoost.
The cooktop or a cooking
zone has turned itself
off unexpectedly, a tone
sounds and an error code
is displayed (typically
Er
alternating with one or
two digits in the cooking
zone displays).
78
TROUBLESHOOTING
POSSIBLE CAUSES
A cooling fan built into your
cooker has come on to prevent
the electronics from overheating.
It may continue to run even after
you've turned the cooktop off.
The cooktop cannot detect the
pan because it is not suitable for
induction cooking.
The cooktop cannot detect the
pan because it is too small for
the cooking zone or not properly
centred on it.
PowerBoost is temporarily
unavailable because the
cooktop needs to protect itself
from overheating.
Technical fault.
E
or
WHAT TO DO
This is normal and needs no
action. Do not switch the power to
the cooktop off at the wall while
the fan is running.
Use cookware suitable for
induction cooking. See section
'Choosing the right cookware'.
Centre the pan and make sure that
its base matches the size of the
cooking zone.
Allow the cooktop to cool down.
lease note down the error
letters and numbers, switch
the power to the cooktop off
at the wall, and contact your
Fisher & Paykel trained and
supported service technician or
Customer Care with the error
code information.