Specifications - Eizo ColorEdge CG2730-BK User Manual

Color management lcd monitor
Table of Contents

Advertisement

6-5. Specifications

LCD Panel
Video Signals
USB
Power
Type
Backlight
Size
Resolution
Display Size (H × V)
Pixel Pitch
Display Colors
Viewing Angle (H × V, typical)
Recommended Brightness
(typical)
Contrast Ratio (typical)
Response Time (typical)
Color Gamut Display (typical)
Input Terminals
Horizontal scanning frequency 26 kHz to 89 kHz (DVI, DisplayPort), 15 kHz to 89 kHz
Vertical scan frequency
Frame Synchronization mode
Dot clock (Max.)
Port
Standard
Communication Speed
Supply Current
Input
Maximum Power Consumption 95 W or less
Power Save Mode
Standby Mode
IPS (Anti-Glare)
Wide color gamut LED
68.5 cm (27.0 inch)
2560 dots × 1440 lines
596.7 mm x 335.6 mm
0.2331 mm x 0.2331 mm
Approx. 1073.74 million colors (for 10 bit input)
178˚ / 178˚
2
120 cd/m
or less (Temperature: 5000 K to 6500 K)
1500 : 1 (When "DUE Priority" setting is "Brightness")
Black - White - Black: 20 ms
Gray-to-gray: 13 ms
®
Adobe
RGB coverage: 99 %, NTSC ratio 108 %
DVI-D x 1: Supports 8-bit display (Single Link / Dual Link,
HDCP-compatible)
HDMI x 1: Supports 8-bit, 10-bit, and 12-bit display
(HDCP-compatible)
DisplayPort x 1: Supports 8-bit and 10-bit display (HDCP-
compatible)
*1 The maximum number of display bits for HDMI-input
images is 10.
*2 Supports 8-bit display when the resolution of the HDMI
input signal is 2560 x 1440.
(HDMI)
23 Hz to 61 Hz (For 720 x 400: 69 Hz to 71 Hz)
23.75 Hz to 30.5 Hz, 47.5 Hz to 61.0 Hz
242 MHz
Upstream port x 2, downstream port x 3 (the
supports quick charging)
USB Specification Rev. 3.0
USB Battery Charging Specification Rev.1.2
5 Gbps (super), 480 Mbps (high), 12 Mbps (full), 1.5 Mbps
(low)
Downstream
: Max. 900 mA per port
Downstream
: Normal: Max. 1.5 A per port, Charging
(
port)
Only: Max. 2.1 A per port
100–240 VAC ±10 %, 50/60 Hz 1.0 A–0.45 A
0.6 W or less
(When "DP Power Save" is set to "ON", "USB CHARGE
Port" is set to "Normal", and no USB device is connected)
0.6 W or less
(When "DP Power Save" is set to "ON", "USB CHARGE
Port" is set to "Normal", and no USB device is connected)
*1, *2
port
45
Chapter 6 Reference

Advertisement

Table of Contents
loading

This manual is also suitable for:

Coloredge cg2730

Table of Contents