Eizo ColorEdge CG2730-BK User Manual page 28

Function
Input Color Format
*2 Only enabled when input signal information according to which the setting can be automatically
determined is detected
*3 Only enabled during HDMI input
*4 Only enabled during DisplayPort input
Function
Input Range
*5 Only enabled during DisplayPort input or HDMI input
Function
Noise Reduction
28
Chapter 3 Advanced Adjustments/Settings
Adjustable Range
*2
Auto
*3
YUV 4:2:2
*3
YUV 4:4:4
*4
YUV
RGB
Adjustable Range
*5
Auto
Full
Limited (109 % white)
Limited
Adjustable Range
On
Off
Description
The color space of the input signal can be specified.
Try changing this setting if colors are not displayed correctly.
Note
• This cannot be configured when DVI input is used. The color
space for DVI input is always set to "RGB".
Description
Depending on the external device, the black and white levels
in the video signal output to the monitor may be restricted. If
the signal is displayed on the monitor in its restricted form,
the blacks will be faint, the whites dull, and contrast will
be reduced. The brightness range of such signals can be
extended to match the actual contrast ratio of the monitor.
• "Auto"
The monitor automatically recognizes the brightness range of
input signals and displays images appropriately.
• "Full"
The input signal brightness range is not extended.
• "Limited (109% white)"
The brightness range of the input signal is extended from
16 - 254 (10 bits: 64 - 1019) to 0 - 255 (10 bits: 0 - 1023) for
display.
• "Limited"
The brightness range of the input signal is extended from
16 - 235 (10 bits: 64 - 940) to 0 - 255 (10 bits: 0 - 1023) for
display.
Description
The small noises that occur in dark areas of an image are
reduced. Use this function to reduce noise and roughness in
images.
Note
• This can only be set during HDMI input.
• Using the Noise Reduction function may lead to
deterioration of fine images.