Table of Contents
Advertisement
●
Connection Procedure (Setup of USB Function)
1. Connect the monitor first to a PC using the signal cable, and start the PC.
2. Connect the USB cable between the USB downstream port of the PC and USB upstream port 1 of
the monitor.
The USB hub function is set up automatically upon connection of the USB cable.
3. Connect the peripheral USB device to the USB downstream port of the monitor.
Note
• In the default settings, USB upstream port 1 is enabled. When connecting two PCs, see
(page
31).
USB upstream
port
44
Chapter 6 Reference
See
"USB CHARGE Port" (page 30)
USB downstream port
"USB Selection"
Advertisement
Table of Contents
