Eizo Foris FS2332-BK User Manual page 25

4.
Choose "Screen" from the Setting menu to perform advanced adjustments.
Adjust the clock, phase and position, in this order.
●
To eliminate vertical bars "Clock"
Procedure
1. Choose "Clock" in the "Screen" menu, and press
The "Clock" menu appears.
2. Adjust the clock with
Press or
3. Press to exit the adjustment.
When blurring, flickering or bars appear on the screen after adjustment, proceed to "Phase" to remove flickering or
blurring.
●
To remove flickering or blurring "Phase"
Procedure
1. Choose "Phase" in the "Screen" menu, and press
The "Phase" menu appears.
2. Adjust the phase with
3. Press to exit the adjustment.
When vertical bars appear on the screen after adjustment, go back to "To eliminate vertical bars "Clock"".
(Clock → Phase → Position)
Attention
• Flickering or blurring may not be eliminated depending on your PC or graphics board.
or to eliminate vertical bars.
slowly so as not to miss the adjustment point.
or to minimize flickering or blurring.
.
.
Chapter2AdjustingScreens
25