Clearance Dimensions - Fisher & Paykel RIV3 Installation Manual

C

CLEARANCE DIMENSIONS

A Minimum width of ventilation hood installed above range
B Minimum vertical distance between countertop and cabinet extending above counter
C Minimum clearance from left and right edge of range to nearest vertical combustible surface
D Minimum clearance from cook surface to:
combustible surface centered above the cook surface
z
combustible covering for ventilation hood centered above the cook surface
z
non-combustible surface* centered above the cook surface
z
E Maximum overall depth of overhead cabinetry
F Width of cabinetry opening
G Maximum height from floor to countertop:
– for level counter
– with range levelling legs fully extended
H Maximum depth from wall to cabinetry face:
projecting control panel
z
flush control panel
z
*Non-combustible surfaces: as defined in 'National Fuel Gas Code' (ANSI Z223.1, Current Edition). Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and
are not certified by UL. Clearances of less than 6" (152mm) must be approved by the local codes and/or by the local authority having jurisdiction.
CLEARANCE DIMENSIONS – ALL MODELS
A
D
B
C
G
electrical
and gas
F
FRONT
30" MODELS 36" MODELS 48" MODELS
IN MM IN MM
30 762 36 914
18 457 18 457
12 305 12 305
54 1372 54 1372
36 914 36 914
30 762 30 762
13 330 13 330
30 762 36 914
35 3/4 908 35 3/4 908 35 3/4
36 3/4 933 36 3/4 933 36 3/4
25 3/8 644 25 3/8 644 25 3/8
27 11/16 703 27 11/16 703 27 11/16
E
H
ISO
Note:
The cooking surface must sit flush or
z
IN MM
above the adjacent countertop level.
If the range is to be placed adjacent
48 1219
z
to cabinets, the clearances shown are
18 457
required. The same clearances apply
to island installations.
12 305
The range can be placed in various
z
positions with respect to the cabinet
54 1372
front, with the control panel either
36 914
flush or projecting, depending on the
30 762
cabinetry depth.
The electrical and gas supply should
13 330
z
be within the zones shown in the
48 1219
following diagrams
Any openings in the wall behind the
z
range and in the floor under the range
908
must be sealed.
933
Always keep the appliance area clear
z
and free from combustible materials,
644
gasoline and other flammable vapors
and liquids.
703
Do not obstruct the flow of combustion
z
and ventilation air to the unit.
9