Helmet Holder - Yamaha XT250N 2000 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
1. Bolt (×2)
4
2. Remove the bolts and pull the
seat off.
5
6
7
8
9
1
2
1. Projection
2. Seat holder
To install the seat
1. Insert the projection on the front
of the seat into the seat holder
as shown.
2. Place the seat in the original
position, and then tighten the
bolts.
3. Install the panels.
NOTE:
Make sure that the seat is properly
secured before riding.
1
3-8
a
1

1. Helmet holder

a. Unlock.
Helmet holder
To open the helmet holder, insert the
key into the lock, and then turn the
key as shown.
To lock the helmet holder, turn the
key to the original position, and then
remove it.
w
Never ride with a helmet attached
to the helmet holder, since the hel-
met may hit objects, causing loss
of control and possibly an acci-
dent.
EAU00261
EW000030