Indicator Lights; Speedometer Unit; Handlebar Switches - Yamaha XT250N 2000 Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
1
1
2
3
1. Turn signal indicator light "TURN"
4
2. High beam indicator light "HIGH BEAM"
3. Neutral indicator light "NEUTRAL"
5

Indicator lights

6 Turn signal indicator light "TURN"
This indicator light flashes when the
turn signal switch is pushed to the left
7
or right.
8
High beam indicator light "HIGH
BEAM"
This indicator light comes on when
9
the high beam of the headlight is
switched on.
Neutral indicator light "NEUTRAL"
This indicator light comes on when
the transmission is in the neutral
position.
2
4
3
1. Speedometer
2. Odometer
3. Tripmeter
4. Reset knob
EAU00056

Speedometer unit

EAU00059
The speedometer unit is equipped
with a speedometer, an odometer
and a tripmeter. The speedometer
shows riding speed. The odometer
EAU00064
shows the total distance traveled.
The tripmeter shows the distance
traveled since it was last set to zero
with the reset knob. The tripmeter
can be used to estimate the distance
that can be traveled with a full tank of
EAU00062
fuel. This information will enable you
to plan future fuel stops.
1
2
3
1. Dimmer switch
2. Turn signal switch
3. Horn switch "*"
EAU00095

Handlebar switches

Dimmer switch
Set this switch to "&" for the high
beam and to "%" for the low beam.
Turn signal switch
To signal a right-hand turn, push this
switch to "6". To signal a left-hand
turn, push this switch to "4". When
released, the switch returns to the
center position. To cancel the turn
signal lights, push the switch in after
it has returned to the center position.
3-2
1 2
3
EAU00118
EAU00121
EAU00127