INSTRUMENT AND CONTROL FUNCTIONS
3. Tighten the locknut to the speci-
fied torque.
1
Tightening torque:
Locknut:
54 Nm (5.4 m0kg)
2
cC
3
Always tighten the locknut against
4
the adjusting nut, and then tighten
the locknut to the specified torque.
5
6
7
8
9
b
ECA00076
1. Rebound damping force adjusting dial
Rebound damping force
To increase the rebound damping
force
and
thereby
rebound damping, turn the adjusting
dial in direction a. To decrease the
rebound damping force and thereby
soften the rebound damping, turn the
adjusting dial in direction b.
Minimum (soft)
Standard
Maximum (hard)
* With the adjusting dial fully turned in direction a
NOTE:
Although the total number of clicks of
the damping force adjusting mecha-
1
nism may not exactly match the
above specifications due to small dif-
ferences in production, the actual
number of clicks always represents
a
the entire adjusting range. To obtain
a precise adjustment, it would be
advisable to check the number of
clicks of the damping force adjusting
mechanism and to modify the specifi-
harden
the
cations as necessary.
20 clicks in direction b*
9 clicks in direction b*
1 click in direction b*
3-10