Fisher & Paykel CI244DTB User Manual page 28

USING YOUR COOKTOP'S SPECIAL FEATURES
If no pan is detected on one cooking zone:
The left hand display will still show the selected temperature and the right hand display
will still show
If after 10 minutes no pan is detected:
the bridging function will switch off.
●
the cooking zone without a detectable pan will turn off.
●
the remaining cooking zone will continue cooking at the selected heat setting.
●
Using Automatic Cooking in bridged mode
1 Bridge the cooking zones by touching both setting slectors (anywhere) simultaneously.
2 Using the left hand setting selector, select the heat setting.
3 Hold your finger on the control at the selected heat setting until
with the selected setting.
To cancel bridging
At the same time, touch the setting selectors of both bridged cooking zones.
The bridging indicator lights will go out.
Note: Sliding the scale down to
Note: Cancelling bridging will also cancel the timer for those cooking zones.
Using the timer in bridged mode:
You may only set one timer for the bridged cooking zone. See 'Setting the timer'.
The timer indicator
26
.
0
will not turn off bridging.
will show in both displays.
A
flashes alternately