Fisher & Paykel CI244DTB User Manual page 20

USING YOUR COOKTOP'S SPECIAL FEATURES
When Auto Heat-reduce is set
Initially, while the cooking zone is
at the highest setting,
alternately with your selected lower
setting. The length of time at the
highest setting depends on the
lower heat setting selected. See
chart below.
If you would like a lower or higher heat setting than you originally selected, simply slide
●
to the new setting and hold until the
flashing and then modify the heat setting.
PRE-SELECTED LOWER HEAT SETTING
To quit the Auto Heat-reduce setting while
Either touch or slide the setting selector to a new setting or touch the COOKING ZONE
ON/OFF control to turn the cooking zone off.
Note:
The Auto Heat-reduce and PowerBoost features cannot be used together. If you turn
●
PowerBoost on when Auto Heat-reduce is already set, the Auto Heat-reduce will cancel
and PowerBoost will stay on.
18
A
will flash
1
2
3
4
5
6
7
8
Then, when the period of highest
setting is over,
the cooking zone will automatically
reduce the heat to your pre-selected
lower setting.
A
starts flashing. Alternatively, wait until
APPROXIMATE TIME AT HIGHEST SETTING
A
is flashing
A
will stop flashing and
A
40 seconds
1 minute
2 minutes
3 minutes
4 minutes
7 minutes
2 minutes
3 minutes
stops