Fisher & Paykel CI244DTB User Manual page 13

If a display flashes
This means that:
you have not placed a pan on the correct cooking zone or
●
the pan you're using is not suitable for induction cooking or
●
the pan is too small or not properly centred on the
●
cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The cooktop will automatically turn off after 10 minutes if no suitable pan is placed on it.
Dual zone cooking (CI365DTB models only)
When using a small pot on the dual cooking zone, be sure to centre it so that the inner
zone will detect the pan. If the pan covers the outer zone, then the outer zone will
automatically switch on.
SmartZones (CI122DTB & CI244DTB models only)
The SmartZones are large. You may place several small pots on the SmartZone and they
will be detected as if they were one large pot.
IMPORTANT!
The whole of the SmartZone is activated when a pot is detected. This means that
other magnetisable items (such as cutlery) sitting in the cooking zone will heat up.
Never leave cutlery or other magnestisable items on your cooktop.
USING YOUR INDUCTION COOKTOP
alternately with the heat setting
11