Water Level
Auto water level (not available on QuickSmart™ washer)
Your washer has the ability to automatically select the
most efficient water level for the load.
Place your clothes in the washer.
1
Select the wash cycle (and select 'Auto' water level if
2
not automatically selected).
Touch
. The washer will automatically fill to the
3
correct water level for the load, for both phases of
the wash.
When washing an unusual load, eg large bulky
●
●
garments, items or pillows, we recommend you select
the 'Delicate' cycle.
If there is already water in the bowl, it is best to
●
●
manually select the water level.
Manual water level selection
The agitator has five levels marked on its stem that
can be used to help you select the correct water
level. Select the correct water level by using the mark
nearest to the top of the load.
The levels marked on the agitator do not correspond
●
●
exactly to the level of the water. They indicate the level
of dry clothes suitable for the water level.
Your washer may occasionally add water during
●
●
agitation. This is to maintain the water level due to the
release of air trapped in the garments.
Out of balance loads, tangling or splash-over can be
●
●
caused by selecting a water level that is too high.
28
WASH OPTIONS
Selecting 'Auto' water level
Water level guide on agitator