Fisher & Paykel WashSmart Eco Installation Instructions & User Manual page 19

GETTING STARTED QUICKLY – QUICKSMART™ WASHER
Using your washer
The buttons require only a gentle touch to activate.
Touch 'POWER'
1
Select your desired wash cycle by gently touching the wash cycle button of your
2
choice (refer to 'Wash cycles' section).
Choose your wash options, eg you may want a 'Warm' wash temperature and a 'Slow'
3
spin speed (refer to the 'Wash options' section).
Touch to start the cycle. The washer will start to fill with water and select the
4
correct wash action for your load.
For best fabric and colour care, remove your clothes as soon as the cycle has finished.
Use 'Keylock' mode to lock the buttons on the display, which prevents them from
5
being activated accidently by a washing basket or little fingers (refer to the 'Washer
controls' section).
If you wish to stop your QuickSmart™ washer
Touch .
● ●
During a spray rinse or spin, there will be a slight delay while the bowl slows to a stop
and the lid is unlocked.
IMPORTANT!
Failure to follow the advice in this guide may result in damage to your garments, and
your expectations of wash performance may not be met.
to activate your QuickSmart™ washer.
3 4
17