Advertisement
Programming flowchart
Assign a User Code
(0)
Press
+
Memory position from
01 to 99
Ex.: To assign User Code "6789" at Memory
Position "6" and Relay that activates for 5
seconds assuming Master Code = 000
000B + 0 + 06 + 6789 + A + 1 + 05 + A + B.
Manufacturer
Version
Certification and Regulatory
information
Contact information
Product Warnings
and Disclaimers
© 2017 UTC Fire & Security. All rights reserved.
Enter "Master Code" OR "000" (if first time use)
1 small beep + 1 long beep + Yellow LED is 'on'
Change
Assign Output
Master code
(0)
Press
Press
+
+
Memory position
Memory
from
position (00)
(01 to 99)
+
Press (1) for Relay1
OR
Press (2) for Relay2
OR
Press (12) for
both outputs
Enter
NEW PIN Code
(1 to 8 digits)
Press "B" (Orange LED is OFF)
UTC Fire & Security Americas Corporation, Inc.
1275 Red Fox Rd., Arden Hills, MN 55112-6943, USA
Authorized EU manufacturing representative:
UTC Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
This document applies to ACL875SU hardware
This product herewith complies with requirements of EMC directive 2014/30/EU. In addition it complies with
RoHS directive EN50581:2012
https://firesecurityproducts.com
THESE PRODUCTS ARE INTENDED FOR SALE TO, AND INSTALLATION BY, AN EXPERIENCED SECURITY
PROFESSIONAL. UTC FIRE & SECURITY CANNOT PROVIDE ANY ASSURANCE THAT ANY PERSON
OR ENTITY BUYING ITS PRODUCTS, INCLUDING ANY "AUTHORIZED DEALER", IS PROPERLY
TRAINED OR EXPERIENCED TO CORRECTLY INSTALL SECURITY RELATED PRODUCTS.
For more information on warranty disclaimers and product safety information, please check
https://www.utcfssecurityproducts.eu/productwarning/ or scan the following code:
Validate by pressing (B)
No
Validation OK?
Yes
Set Output Timer
Pulsed Mode (01 to 99 sec):
(3)
Relay1:
Press (1) + (from 01 to 99)
Relay2:
Press (2) + (from 01 to 99)
OR
Latch Mode (ON/OFF):
Press (1) or (2) + (00)
Press "A" to validate
No
Validation OK?
Yes
www.interlogix.com
or
4 / 4
Multiple small beeps
+
Orange LED blinks rapidly
Delete Single
Code
(9)
Press
+
Memory
position from
(01 to 99)
Delete ALL
codes
(8)
Press
+
(99)
2017-10-13
Advertisement
