Advertisement
Application diagram
12 to 24 VDC
15 to 24 VAC
Transistor
DIP switch and Status LED's
Backlight in Idle Mode ON/OFF
Redefine Master Code
Redefine "Master Code"
It is possible to redefine and restore the default setting if the Master code is forgotten.
1. Disconnect power and put the DIP switch1 to ON
2. Reconnect power
(Beep Beep ... + Orange LED blinks)
3. Put back the DIP switch1 to OFF
4. Press 000
5. Press the new Master Code
6. Press A
(Beep Beep)
7. Press B
(Orange LED OFF)
© 2017 UTC Fire & Security. All rights reserved.
Diode 1N4001
15 to 24 VAC
Default: 1 – OFF; 2 - ON
(Orange LED ON + Long beep)
12 to 24
VDC
Note: Exit button (NO) automatically activates relay
output1.
NOTE:
The PIN code is typed with A for confirmation.
Example:
123 + A
3 / 4
Green LED -
Output 1 Status
Red LED -
Output 2 Status
Orange LED -
Key press and Menu
2017-10-13
Advertisement
