Adapter Pinouts - Cisco Catalyst 3040 Hardware Installation Manual

Appendix B Connector and Cable Specifications
Figure B-7
Pin 1

Adapter Pinouts

Table B-1
Table B-1
Switch
Console
Port (DTE)
Signal
RTS
DTR
TxD
GND
GND
RxD
DSR
CTS
Table B-2
console device.
The RJ-45-to-DB-25 female DTE adapter is not supplied with the blade switch. You can order a kit (part
Note
number ACS-DSBUASYN=) containing this adapter from Cisco.
OL-10694-01
Identifying a Crossover Cable
Pin 1 on one connector and
pin 8 on the other connector
should be the same color.
lists the pinouts for the console port, the RJ-45-to-DB-9 adapter cable, and the console device.
Console Port Signaling Using a DB-9 Adapter
RJ-45-to-DB-9
Terminal Adapter
DB-9 Pin
8
6
2
5
5
3
4
7
lists the pinouts for the console port, RJ-45-to-DB-25 female DTE adapter, and the
Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide
Pin 8
Console
Device
Signal
CTS
DSR
RxD
GND
GND
TxD
DTR
RTS
Cable and Adapter Specifications
B-5