ECO
®
Tec
series 2 gas-fired water boiler – advanced manual
SERVICE menus
Figure 43 SERVICE menus — navigation
Service Info
Name
Phone
Model
CP Number
Installed
Last Maintenance Performed
Next Maintenance Due
Interval Settings
Reset Reminder
Last Calibration Date
SERVICE INFO
Use this section to enter contractor's information, Consumer Protection (CP) number, install date and to enter an automatic notice
for maintenance (default is 12 months). Because this shows on the display, it is an automatic means of notifying the homeowner of
need for scheduled maintenance by the technician. Select RESET REMINDER to reset for the next maintenance date.
Contractor name to appear in maintenance reminders and during lockouts.
Contractor phone number.
Displays the boiler model selected in the boiler setup.
Enter the Consumer Protection (CP) number of the boiler.
Enter the date the boiler was installed.
Date automatically entered when Reset Reminder is chosen by contractor.
Date automatically calculated when Reset Reminder is selected by contractor.
Contractor selects maintenance reminder frequency based on service history.
Contractor selects this to update Last maintenance Date and Next Date. Homeowner uses this to ignore the
reminder and update only the Next Date.
Displays the date of last calibration preformed.
Comment