Bluetooth - Weil-McLain Eco Tec 2 Series Advanced Manual

®
ECO Tec series 2 gas-fired water boiler – advanced manual
HOMEOWNER NAVIGATION menus
Boiler Model, Altitude and Fuel Type are
critical settings. Failure to set correctly could
result in severe personal injury, death or substantial
property damage.
Figure 27 ECO Tec Homeowner Navigation menu access — accessing Homeowner menus
MENU
DATE/TIME BACKLIGHT CLEAN
NETWORK HOT WATER MAINTENANCE
2/28/20
9:45AM
WIRELESS STATUS

BLUETOOTH

ON
FCC: 2AC7Z-ESP32WROOM32E
IC: 21098-ESPWROOM32E
2/28/20
9:45AM
Screens shown above are typical only.
Actual screens depend on control settings
chosen.
Part number 550-100-272/1021
MENU Item
BLUETOOTH
SOFTWARE BLUETOOTH
SETTINGS
BLUETOOTH STATUS
Assembled From
tested components
Complete system
not tested
NETWORK
HOT WATER
MAINTENANCE
SETTINGS
1. Access contractor menus by pressing and holding the WM
Logo for 7 seconds from the home screen.
2. See the following pages for explanations of control setting op-
tions.
PURPOSE
• Allows the user to turn Bluetooth ON or OFF. Swipe right
from HOME and press BLUETOOTH to reach FCC and
IC information.
• Bluetooth allows the user to connect remotely to the Weil-
McLain ProTool app, where the user can wirelessly com-
municate to the boiler. The app functions include, but are
not limited to, allowing the user to install the latest software
for their boiler control, display and Bluetooth radio, gives
quick access to boiler information, and provides contact
information to WM Technical Services.
FCC: Wireless device unique identifier registered
with the U.S. Federal Communications Commission.
IC: Wireless certification approval number unique to
all devices, required for Canada.
• This device complies with Part 15 of the FCC Rules. Op-
eration is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
• Shows all boilers on the Network, their current status,
temperature and Mod Rate.
• Allows the user to edit the Hot Water Temp of the Combi
demand, as well as enable or disable PREHEAT mode or
ECO BOOST.
• Allows the user to view contractor and maintenance
information, as well as reset the maintenance reminder
when present.
• Allows the user to edit temperature units, screen time out,
daylight savings time and sound effect of presses.
(continued)
(continued)
– 57 –