Agilent Technologies 75000 B Series Service Manual page 66

A-8 Example C Programs
if (result[i][1] > .01)
printf ("\n\n***** Channel path leakage out of tolerance %6.4lf Volts *****",
result[i][1]);
/*...........................Tree Check....................................................*/
printf (".");
iprintf (id, "SCAN:PORT ABUS\n");
iprintf (id, "CLOS (@100)\n");
iprintf (dm, "TRIG SGL\n");
iscanf (dm, "%lf", &result[i][2]);
iscanf (dm, "%t", cr);
if (result[i][2] > .01)
printf ("\n\n***** Tree A path leakage out of tolerance %6.4lf Volts *****",
result[i][2]);
printf (".");
iprintf (id, "OPEN (@100)\n");
iprintf (id, "CLOS (@115)\n");
iprintf (dm, "TRIG SGL\n");
iscanf (dm, "%lf", &result[i][3]);
iscanf (dm, "%t", cr);
if (result[i][3] > .01)
printf ("\n\n***** Tree B path leakage out of tolerance %6.4lf Volts *****",
result[i][3]);
printf (".");
if (i < 5)
{
printf ("\n\nTest %u complete", i+1);
printf ("\nTurn power supply OFF");
printf ("\nPress ENTER for test %u", i+2);
getchar ();
}
}
printf ("\n\nLeakage tests complete.");
printf ("\nPress ENTER to display measurement results.");
getchar ();
/*...........................Display Measurement Results................................*/
printf ("\n\n-------------------------------------------------------------");
printf ("\n Positive Polarity Leakage
printf ("\n-------------------------------------------------------------");
printf ("\n Direct
printf ("\nHI to LO %6.4lf Vdc %6.4lf Vdc %6.4lf Vdc %6.4lf Vdc", result[0][0],
result[0][1], result[0][2], result[0][3]);
printf ("\nHI to Chassis %6.4lf Vdc %6.4lf Vdc %6.4lf Vdc %6.4lf Vdc",
result[1][0], result[1][1], result[1][2], result[1][3]);
printf ("\nLO to Chassis %6.4lf Vdc %6.4lf Vdc %6.4lf Vdc %6.4lf Vdc",
result[2][0], result[2][1], result[2][2], result[2][3]);
\n");
Channels Tree A Tree B\n");